NigCat

Governance

Memorandum of Association

Memorandum of Association of the Nigeria Society for Catalysis Science and Engineering (NigCat)

PREAMBLE

The Nigeria Society for Catalysis Science and Engineering (NigCat) is a proposed association of scientists and engineers dedicated to advancing the field of fundamental and applied catalysis in Nigeria. NigCat’s areas of interest include heterogeneous and homogeneous catalysis, computational catalysis, enzymatic and biosystems, environmental catalysis, fuel cell technology, clean technology, and other related fields. In developing catalysis and catalytic processes in Nigeria, NigCat will draw on members from Nigerian Universities, Polytechnics, Research Institutes, relevant Ministries, Departments, and Agencies, as well as Nigerians in the diaspora.

The role of catalysis in Nigeria’s emerging economy cannot be overstated, with refining capacity expected to reach at least 1.295 million barrels per day by 2024 and ongoing petrochemical investments. Nigeria is currently a net fertiliser exporter, with over 6 million metric tonnes of the commodity exported annually. Investments are also continuing in the fine chemicals industry. The development of catalysis science and technology in Nigeria will play a vital role in the long-term sustenance of these industries. NigCat will encourage and enhance mutual interactions amongst Nigeria’s academia, industries, and relevant government agencies.

ARTICLE 1 – NAME, STATUS, AND REGISTERED OFFICE

1.1 The proposed name of the association shall be the Nigeria Society for Catalysis Science and Engineering (NigCat) (hereinafter referred to as “the Society”).

1.2 The Society shall be a non-profit, non-political, and non-religious professional body, incorporated as a legal entity under Part C of the Companies and Allied Matters Act (CAMA) of the Federal Republic of Nigeria.

1.3 The registered office of the Society shall be at No. 30, Abattoir Road, Zango, Jammaa, Sabon Gari Local Government Area, Kaduna State, Nigeria, or such other place as may be determined by the Governing Council.

ARTICLE 2 – AIMS AND OBJECTIVES

The objectives of NigCat are to promote and advance fundamental and applied catalysis science and technology in Nigeria, and specifically to:

2.1 Facilitate capacity building and professional development of scientists and engineers in catalysis and related fields.
2.2 Encourage the standardisation and optimal use of catalysis-related analytical equipment nationwide.
2.3 Serve as a knowledge hub for the acquisition, management, and dissemination of catalysis-related information.
2.4 Develop and strengthen public-private-government partnerships to boost the catalysis sector.
2.5 Encourage local and international collaborations, including efforts toward membership of the International Association of Catalysis Societies (IACS).
2.6 Organise conferences, workshops, publications, and outreach programs to promote awareness and knowledge exchange.

ARTICLE 3 – MEMBERSHIP

3.1 Categories of Membership

• Individual Members – Scientists, engineers, and professionals engaged in catalysis research and development.
• Student Members – Undergraduate or postgraduate students interested in catalysis.
• Corporate Members – Companies, research institutes, and government agencies involved in catalysis-related industries.
• Honorary Members – Individuals or organisations recognised for outstanding contributions to catalysis.

3.2 Admission of Members

• An applicant must complete a membership application form and pay the prescribed fees.
• Admission shall be subject to approval by the Membership Committee.

3.3 Rights and Duties

• Individual and Corporate Members shall have voting rights and the right to hold office.
• Student and Honorary Members shall enjoy all privileges except voting and holding elective positions.
• Members shall abide by the Constitution, pay dues, and promote the objectives of the Society.

3.4 Termination of Membership

Membership may be terminated by resignation, non-payment of dues for two consecutive years, or expulsion for professional misconduct (subject to Article 8).

ARTICLE 4 – GOVERNANCE AND STRUCTURE

4.1 Board of Trustees (BoT)

The Society shall have a Board of Trustees consisting of:

• Chairman
• And at least a member representing each of the geopolitical zones in Nigeria

4.2 Duties of the Board of Trustees

The Board of Trustees shall serve as the custodians of the Society’s vision, mission, and long-term strategic direction. They shall:

• Hold the legal authority of the Society’s registration with the Corporate Affairs Commission (CAC).
• Provide oversight on compliance, ethics, and long-term sustainability.
• Approve major constitutional amendments and strategic decisions.
• Support external partnerships, fundraising, and institutional linkages.

4.3 Governing Council

The Society shall be governed by a Governing Council consisting of:

• President
• Vice President
• General Secretary
• Assistant Secretary
• Treasurer
• Public Relations Officer
• Technical Secretary
• Immediate Past President (ex-officio)

4.4 Election and Tenure

• Officers shall be elected at the Biennial General Meeting (BGM) by a simple majority of members present.
• Each officer shall serve for two (2) years and may be re-elected for one additional term.

4.5 Duties of Officers

a. President

The President:

• shall be the chief executive of the Society.
• shall preside over all meetings of the Society at which he is present, and shall regulate the proceedings, or in his absence, the Vice President or in the absence of both, the meeting shall elect a Chairman from amongst the members present.
• shall cause the meeting to be summoned either on his initiative or at the request of at least ten corporate members of the Society.
• shall submit an annual report on the activities of the Society at the annual general meeting.

b. Vice President

The Vice President:

• shall assist the President in the general running of the Society.
• shall, in the absence or inability of the President, perform the duties and exercise the powers of the President.
• shall be the chairman of the Membership Committee.

c. General Secretary

The General Secretary:

• shall keep a register of all members of the Society.
• shall summon meetings either on the instruction of the President or at the request (in writing) of not less than ten corporate members from at least two chapters of the Society.
• shall record and keep minutes of all meetings of the Society and perform all other functions allotted to him by the President.
• shall collect, collate and administer nominations for all elections to offices of the Society.

d. Treasurer

The Treasurer:

• shall receive and keep in an account specified by the Society all moneys due or accruing to the Society.
• shall, without let or hindrance, submit for inspection all papers and documents regarding the Society’s finances/financial transactions to the auditor(s) authorised by the Council.

e. Public Relations Officer (PRO)

The Public Relations Officer:

• shall publicise the policies and activities of the Society.
• shall be responsible for creating a good public image of the Society.
• shall manage the Society website and social media handles.
• shall organise all social activities of the Society.

f. Technical Secretary

The Technical Secretary:

• shall be the Chairman of the Technical Committee.
• shall supervise the collection, editing, and processing of all technical materials to be published by the Society.

ARTICLE 5 – MEETINGS

5.1 The Annual General Meeting (AGM) shall be held once every year.

5.2 A Biennial General Meeting (BGM) shall elect new officers.

5.3 The Board of Trustees shall meet at least two (2) times annually (virtually or physically).

5.4 The Governing Council shall meet at least four (4) times annually (virtually or physically).

5.5 Quorum:

• General Meetings – One-third of registered members.
• Council Meetings – Five (5) members.

ARTICLE 6 – FINANCE

6.1 Sources of funds include:

• Membership registration and annual dues.
• Grants, donations, and sponsorships.
• Proceeds from workshops, conferences, and publications.

6.2 The Society shall maintain a bank account operated by the Treasurer, President, and Secretary (any two signatories).

6.3 The financial year shall run from 1st January to 31st December.

6.4 Annual accounts shall be audited by an external auditor and presented at the AGM.

ARTICLE 7 – COMMITTEES

7.1 The Governing Council may establish standing or ad-hoc committees, including:

• Membership Committee
• Technical Committee
• Finance and Fundraising Committee

7.2 Functions of the Committees:

a. Membership Committee

• shall consider the suitability of a prospective member and recommend admission or rejection and grade of admission to the Council.
• shall, from time to time, make recommendations to the Council towards updating the requirements for the various grades of membership of the Society.

b. Technical Committee

• shall collect, cause to edit and process all technical materials to be published in any form approved by the Council on behalf of the Society.
• shall organise seminars, conferences, workshops, etc.

c. Finance and Fundraising Committee

• shall be responsible for working out strategies for fundraising and judicious dispensation of funds.
• Its Chairman, who shall be a member of the Council, shall report to the Council from time to time.
• The Committee shall undertake other assignments as directed by the Council that may be deemed necessary from time to time.

ARTICLE 8 – DISCIPLINE AND SANCTIONS

8.1 A member may be sanctioned for:

• Gross misconduct or unethical practices.
• Breach of the Constitution.

8.2 Disciplinary measures include:

• Warning, suspension, or expulsion, based on recommendations by the Disciplinary Committee and approval by the Council.
• The Council shall set up a three-member disciplinary committee to investigate any alleged case of professional misconduct. If found guilty, the committee shall recommend to the Council appropriate disciplinary measures to be taken.

ARTICLE 9 – AMENDMENTS

This Constitution may be amended by a two-thirds (2/3) majority of members present at the General Meeting, provided that 30 days’ notice of the proposed amendment is given.

ARTICLE 10 – DISSOLUTION

10.1 The Society may be dissolved by a three-fourths (3/4) majority vote of members at a General Meeting.

10.2 Upon dissolution, all assets shall be transferred to a recognised academic or scientific institution in Nigeria for the promotion of catalysis research.

Signed this 4th day of August, 2025

For and on behalf of the Nigeria Society for Catalysis Science and Engineering (NigCat):

Name: Prof. Abdulazeez Yusuf Atta

Position: Convener

Date: 4th August 2025